Description

PU accessories

Makroflex Premium Cleaner

Cleaning agent for fresh PU foam

 

MAKROFLEX PREMIUM CLEANER removes fresh PU foam stains and other adhesives and paints from smooth surfaces. Quick-drying.

Chemical basis: Acetone, Butylacetate

MAKROFLEX PREMIUM CLEANER can not be used to clean cured foam! The cleaner can damage lacquered or painted surfaces, textiles and plastics! Avoid spraying on spotless surfaces. Powerful solvent!

Application areas

  • Cleaning fresh PU foam spots
  • Cleaning PU foam applicators

Application temperature of this product is min +5°C, maximum application temperature +25°C.

Best before 36 months. For longest shelf life avoid storage above +25°C and below +5°C (up to – 20°C for a short period).

Packaging: 500/650 ml

How to use

PU accessories

CAUTION!

MAKROFLEX PREMIUM CLEANER can not be used to clean cured foam! The cleaner can damage lacquered or painted surfaces, textiles and plastics! Avoid spraying on spotless surfaces. Powerful solvent!

Cleaning fresh PU foam spots

Put the actuator on the valve and spray on the spots. Allow the solvent to act for a while and remove that with a dry cloth.

Cleaning PU foam applicator

For inside cleaning screw the can on the gun, remove cured foam mechanically and spray through the gun until the leaving liquid is clear.

Cleaning of the dispensing gun is necessary if:

  • Difficulties have been experienced while using a gun
  • Gun has not been used for more than 1 month
  • After removing the can from the gun without replacing it with a new can

Additionally, it is highly recommended to clean the gun regularly after 2 – 3 months of using time. This will guarantee long life and functioning without problems for the gun.

 

Let the cleaner act for a short while and spray again. Clean the screw thread as well.